Crash frame:
Galvanized steel
Fillet weld / corner weld |   |
|---|---|
| Welding process: | KF-pulse |
| Welding speed: | 80 cm/min |
| Base material 1: | DP1200 + Z100 1.5 mm |
| Base material 2: | DP1200 + Z100 1.5 mm |
| Filler material: | G3Si1 (ER70-S) Ø 0.8 mm |
| Shielding gas: | 92 % Ar + 8 % CO2 |
Special requirements for galvanized crash frames
- high tightness requirements
- no pores
Picture gallery: crash frame, galvanized
Crash frame (bottom):
Galvanized steel
Fillet weld | |
|---|---|
| Welding process: | KF-pulse |
| Welding speed: | 80 cm/min |
| Base material 1: | DP1200 + Z100 1.5 mm |
| Base material 2: | DP1200 + Z100 1.25 mm |
| Filler material: | G3Si1 (ER70-S) Ø 0.8 mm |
| Shielding gas: | 92 % Ar + 8 % CO2 |
Special requirements for galvanized crash frame (bottom)
- high tightness requirements
- no pores
