Control arm:
Galvanized steel
Lap weld |  |
|---|---|
| Welding process: | KF-Pulse |
| Welding speed: | 90 cm/min |
| Heat input per unit length: | 320 J/mm |
| Base material 1: | HC 420 LA ZE75/75 2.0 mm |
| Base material 2: | HC 420 LA ZE75/75 2.0 mm |
| Filler material: | G3Si1 (ER 70-S) 1.2 mm |
| Shielding gas: | 92 % Ar 8 % CO2 |
Special features – Control arm (lap weld)
- low spattering
- good gap bridging
- high welding speed
- clean weld surface
- no pores
SKS welding application for axles: Control arm (lap weld, position PC), galvanized steel
Picture gallery – Control arm, galvanized (lap weld)
