Control Arm:
Steel
Lap weld |  |
|---|---|
| Welding process: | Dual Wire 2.0 I-pulse |
| Welding speed: | 150 cm/min |
| Heat input per unit length: | 498 J/mm |
| Base material 1: | mild steel 3.6 mm |
| Base material 2: | mild steel 3.8 mm |
| Filler material: | 2x G3Si1 (ER 70-S) 1.0 mm |
| Shielding gas: | 92 % Ar - 8 % CO2 |
Special features – Control arm (lap weld)
- low spattering
- good gap bridging
- high welding speed
- clean weld surface
- no pores
Picture gallery – Control arm (lap weld)
