Torsion axle crossbar:
Steel
Fillet weld |  |
|---|---|
| Welding process: | KF-pulse |
| Welding speed: | 84 cm/min |
| Heat input per unit length: | 506 J/mm |
| Base material 1: | tube 3.2 mm |
| Base material 2: | traverse 6.0 mm |
| Filler material: | G3Si1 (ER 70-S) 1.0 mm |
| Shielding gas: | 92 % Ar - 8 % CO2 |
Special requirements – Torsion axle crossbar
- very clean weld surface
- low silicate adhesion
- no spatter
