Turbocharger:
High-alloy steel
Lap weld, three-sheet joint |  |
|---|---|
| Welding process: | microMIG |
| Welding speed: | 40 cm/min |
| Heat input per unit length: | 388 J/mm |
| Base material 1: | outer shell 2.0 mm |
| Base material 2: | inner shell 1.5 mm |
| Base material 3: | turbocharger housing (cast) |
| Filler material: | 1.4829 (ER 308) 1.0 mm |
| Shielding gas: | 98 % Ar -2 % CO2 |
Special features – Turbocharger
- limited accessibility
- minor spatter
- good gap bridging
Picture gallery – Turbocharger
