Seat back reinforcement:
Steel
Fillet weld |  |
|---|---|
| Welding process: | I-pulse |
| Welding speed: | 40 cm/min |
| Base material 1: | weld nut 4.5 mm |
| Base material 2: | reinforcement 3.0 mm |
| Filler material: | G3Si1 (ER 70-S) 1.0 mm |
| Shielding gas: | 82 % Ar 18 % O2 |
Special features – Seat back reinforcement
- no spatter
- very good penetration
Picture gallery – Seat back reinforcement
